Labconco System Life Science Model 9000740 WaterPro PS / UF Polishing Station, 230V, 50/60Hz, North American Plug and Receptacle - MDL-LBC9000740 - 1 Each

Labconco System Life Science Model 9000740 WaterPro PS / UF Polishing Station, 230V, 50/60Hz, North American Plug and Receptacle

The Labconco System Life Science Model 9000740 WaterPro PS / UF Polishing Station, 230V, 50/60Hz, North American Plug and Receptacle covers everyday requirements across clinical and laboratory settings. WaterPro PS Polishing System/UF Life Science Model.

Key Features

• WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.
• Purification Method: Carbon Filtration, Deionization, Ultrafiltration, Ultraviolet Oxidation.
• Timed dispense for unattended operation.
• Option of Dispensing gun model available.
• Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time.
• Attractive and corrosion-resistant Type 304 stainless steel front panel.
• Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water.
• Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point.
• Built-in dispensing center.
• Quiet 1/4 hp motor and rotary vane recirculation pump.
• Dispensing valve.
• Wall mountable.
• TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models).
• UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models).
• ETL listed (115 volt models).
• CE Conformity (230 volt models.
• Activated Carbon Cartridge for WaterPro PS Polishing System.

Specifications